Call Today

 

The content below in relation to How to Troubleshoot and Repair an Electric Water Heater is fairly captivating. You should look it over.

Several modern-day residences utilize an electrical water heater for their heating system, because of its convenience and simplicity of use. Nonetheless, similar to any other electric appliances, issues may arise with its usage, all of a sudden. It can be actually aggravating to awaken to a cool shower as opposed to a warm one or having your bath with water that isn't hot sufficient or perhaps also hot. Whatever the situation may be, hot water heater troubles can be rather nerve-racking. Thankfully, we've made a listing of feasible options to your water heater problems. There are a variety of factors that might cause many of these issues, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for safety. Whatever the trouble is, getting it fixed must not posture excessive of a problem if you adhere to these steps:

 

Examine Your Power Supply:

As standard as this may seem, it is really essential. Without appropriate power, your hot water heater will certainly not operate. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Check if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the concern, just turn it on and off once more. Change any type of broken or worn-out fuse. Evaluate the device with power after these modifications to see if it's now functioning.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power trouble, then try checking out your burner if it is still functioning. Check each of your heating elements to make sure the problem isn't with any one of them. If any one of them is faulty, change that component and then check whether the warm water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot sufficient, you might require to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the gain access to panel and press the red button for temperature level reset above the thermostat. This must aid heat up the water. Transform the circuit breaker back on and also check if the problem has been solved.

 

Call A Professional:

If after replacing all defective components as well as resetting your temperature level, the hot water heater still isn't functioning, you may need to call an expert plumber for a professional viewpoint. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the quantity of hot water needed in your house. Whatever the case may be, an expert plumber would assist address the issue.

 

Verdict

Water heater problems are not constantly significant. A lot of them are due to minor problems like a blown fuse or damaged heating element. Changing the malfunctioning parts ought to do the trick. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber to come to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I discovered that blog post about What Would Cause My Electric Water Heater to Stop Working? when doing a search on the web. Sharing is caring. You never know, you may very well be helping someone out. I appreciate reading our article about Hot Water Heater Repair.

Rely on our emergency expertise.